xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
123
DGS–3426:5#enable gvrp
Command: enable gvrp
Success.
DGS–3426:5#
disable gvrp
Purpose Used to disable GVRP on the Switch.
Syntax
disable gvrp
Description This command, along with enable gvrp, is used to enable and disable GVRP on the
Switch, without changing the GVRP configuration on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable the GARP VLAN Registration Protocol (GVRP):
DGS–3426:5#disable gvrp
Command: disable gvrp
Success.
DGS–3426:5#
show vlan
Purpose Used to display the current VLAN configuration information including parameters settings
and operational value on the Switch.
Syntax
show vlan {[<vlan_name 32> | vlanid <vidlist>] | ports <portlist>}
Description This command is used to display summary information about each VLAN including the
VLAN ID, VLAN name, the Tagging/Untagging status, and the Member/Non–
member/Forbidden status of each port that is a member of the VLAN.
Parameters
<vlan_name 32> − The VLAN name of the VLAN for which to display a summary of
settings.
vidlist – Specifies a list of VLANs by VLAN ID.
ports – Specifies a port or range of ports for which the VLAN status is to be displayed.
Restrictions None.
Example usage:
To display the Switch’s current VLAN settings:
