A SERVICE OF

logo

xStack
®
DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
415
To configure RSPAN redirect:
DGS-3426:5#config rspan vlan vlan_id 2 redirect add port 1:18
Command: config rspan vlan vlan_id 2 redirect add port 1:18
DGS-3426:5#
show rspan
Purpose Used by display RSPAN configuration.
Syntax
show rspan {[vlan_name <vlan_name> | vlan_id <vlanid 1-4094>]}
Description This command is used to display RSPAN configuration.
Parameters vlan_name – Specifies the RSPAN VLAN by VLAN name.
vlan_id – Specifies the RSPAN VLAN by VLAN ID.
Restrictions None.
Example usage:
To display RSPAN:
DGS-3426:5#show rspan
Command: show rspan
RSPAN : Enabled
RSPAN VLAN ID : 2
--------------------
Source Port
RX : 1:2-1:5
TX :
Redirect Port : 1:18
Total RSPAN VLAN :1
To display RSPAN by VLAN name:
DGS-3426:5#show rspan vlan_name vlan2
Command: show rspan vlan_name vlan2
RSPAN : Enabled
RSPAN VLAN ID : 2
--------------------
Source Port
RX : 1:2-1:5
TX :
Redirect Port : 1:18
Total RSPAN VLAN :1