136
www.gateway.com
5 Enable the Validate server certificate option, then select the name of the certificate you
downloaded for this client in step 4 of the previous procedure. For more information,
see “Obtaining a TLS-EAP certificate for a client” on page 151.
6 Click OK on each dialog box to close and save the settings.
Connecting to the wireless network with an IEEE 802.1x client using a certificate
IEEE 802.1x clients should now be able to connect to the access point using their TLS
certificates. The certificate you installed is used when you connect, so you will not be
prompted for login information. The certificate is automatically sent to the RADIUS server
for authentication and authorization.
Association Tab Network Authentication Open
Data Encryption WEP
Note: An RC4 stream cipher is used to encrypt the
frame body and cyclic redundancy checking (CRC)
of each IEEE 802.11 frame. This is the same
encryption algorithm as is used for Static WEP;
therefore, the data encryption method configured on
the client for this mode is WEP.
This key is provided for
me automatically
Enable (click to select) this option
Authentication Tab Enable IEEE 802.1x
authentication for this
network
Enable (click to select) this option
EAP Type Choose Smart Card or other Certificate
Smart Card or other
Certificate Properties
dialog box
Validate Server
Certificate
Enable (click to select) this option.
Certificates Select the certificate from the list.
