TLISt
Selector :MACHine{1|2}:TLISt
The TLISt selector is used as part of a compound header to access those
settings normally found in the Timing Listing menu. It always follows the
MACHine selector because it selects a branch directly below the MACHine
level in the command tree.
Example OUTPUT XXX;":MACHINE1:TLIST:LINE 256"
COLumn
Command :MACHine{1|2}:TLISt:COLumn <col_num>
[,<module_num>,MACHine{1|2}],<label_name>,<base>
The COLumn command configures the timing analyzer listing by assigning a
label name and base to one of the 61 vertical columns in the menu. A column
number of 1 refers to the leftmost column. When a label is assigned to a
column it replaces the original label in that column.
To insert time values, use the label name "TAGS". When the label name is
"TAGS," the next parameter must specify RELative or ABSolute.
A label for tags must be assigned in order to use ABSolute or RELative time
tagging.
<col_num> integer from 1 to 61
<module_num> {1|2|3|4|5|6|7|8|9|10}
<label_name> a string of up to 6 alphanumeric characters
<base> {BINary|HEXadecimal|OCTal|DECimal|TWOS|ASCii|SYMBol} for
labels or
{ABSolute|RELative} for time
TLISt Subsystem
TLISt
14–7
