A SERVICE OF

logo

Open as PDF
next previous
1-28 Service Manual
5021-0XX
5. Variation of the OPC belt potential:
a. The OPC belt is biased to -CBV(V).
b. The OPC belt surface is evenly charged to -Vo(V) during the
charging process.
c. During the exposing process, the optical unit emits a laser
beam that strikes the OPC belt surface forming an
electrostatic image. The electrostatic image is at -VR(V)
potential.
d. The negatively charged toner is moved to the OPC belt in
the development process due to the difference between
-VR(V) and -DBV(V). A visible image is the result.
e. The negatively charged toner on the OPC belt is moved to
the transfer belt because the potential GND of the transfer
belt is greater than -VR(V) of the OPC belt.
f. The OPC belt is discharged by the erase lamp radiating on
the OPC belt.
-CBV
-V0
Latent image
Toner image
TEST
PRINT
-CBV
-V0
-CBV
-V0
-CBV
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
TEST
PRINT
-V0
-V0
-CBV
-CBV
-CBV
-CBV
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
-V0
TEST
PRINT
Transfer belt
Blade
6
5
4
Erase lamp
OPC belt
1
2
3
Charging
Laser diode
exposing
Developing
KY
M
C
0V
OPC belt surface
-VR
-CBV
-V0
Charge brush
Discharge roller
OPC charging system
DCV
-CBV
-CHV
(-BRV)
Developer roller
-DBV
(M)toner
-DBV