Filter
Top Products
50 DMM 12BC
Installation and Connection
NOTE
Before connecting, read the operating instructions for your microphones and accessories.
Connect microphones and accessories to the back of the DMM 12BC:
1) Connect microphones and other signal sources (e.g. wireless microphone receivers) to
the "IN" input channels.
2) Connect the "OUT - L" and "OUT - R" output channels to a mixing desk or amplifier.
3) Connect the RCA jacks on the stereo recording output "REC (OUT)" to a recording device.
ATTENTION
Do not connect the unit to the mains power supply until you have established all the audio
connections!
1) Connect the mains power supply cable to the appropriate socket on the rear panel of the
DMM 12BC.
2) Plug the power supply cable into a mains socket.
Connecting microphones and accessories
Mains connection