Filter
Top Products
DMM 12BC 67
Operation
ROUTING TO OUT 1
Figure 49: ROUTING TO OUT 1 function
All the input channels can be controlled in the "ROUTING TO OUT 1" mode.
Figure 50: Adjustment range for the function
The function for the relevant channel is switched on by turning the rotary knob in the
clockwise direction (entire LED ring is illuminated). Turning the rotary knob counter-clockwise
switches the function off (only one LED is illuminated).
NOTE
Pressing the rotary knob also switches the function on or off.
Switching this on sets the input channel to the OUT 1 master bus.