Filter
Top Products
70 DMM 12BC
Operation
ROUTING TO DIGOUT
Figure 55: ROUTING TO DIGOUT function
All the input channels can be controlled in the "ROUTING TO DIGOUT" mode.
Figure 56: Adjustment range for the function
The function for the relevant channel is switched on by turning the rotary knob in the
clockwise direction (entire LED ring is illuminated). Turning the rotary knob counter-clockwise
switches the function off (only one LED is illuminated).
NOTE
Pressing the rotary knob also switches the function on or off.
Switching this on sets the input channel to the DIGOUT master bus.