Filter
Top Products
DMM 12BC 69
Operation
ROUTING TO REC
Figure 53: ROUTING TO REC function
All the input and output channels can be selected in the "ROUTING TO REC" mode.
Figure 54: Adjustment range for the function
The function for the relevant channel is switched on by turning the rotary knob in the
clockwise direction (entire LED ring is illuminated). Turning the rotary knob counter-clockwise
switches the function off (only one LED is illuminated).
NOTE
Pressing the rotary knob also switches the function on or off.
Switching this on sets the input channel to the REC master bus.