Filter
Top Products
DMM 12BC 65
Operation
PAN / BALANCE
Figure 44: PAN / BALANCE function
The "PAN / BALANCE" mode allows all the input channels in the panorama and the balance of
all the output channels to be controlled.
NOTE
Balance means assignment of a main signal to the output.
Changes to the channels just cause attenuation!
Figure 45: Adjustment range for the function
Only the upper middle LED lights up (0 dB) with linear adjustment. This LED (0 dB) is also
considered to be the starting point for a clockwise or counter-clockwise rotation. More LEDs
light up on the left side as the rotary knob is turned further to the left. More LEDs light up on
the right side as the rotary knob is turned further to the right.
If no further output is required from the left output channel of a stereo output, turn the balance
controller to the right.
In mono inputs, the signal is assigned equally to stereo left andright as standard. If the input is
to be assigned to the left only , turn the rotary knob for the input to the left when the PAN
function is active.