Filter
Top Products
SECTION 1
8
SAVING (STORING) EDITED PROGRAMS
1) Once a program has been edited to your liking, press the
STORE button. The LED in the middle of the button will flash.
2) The numeric display will show the current program number if it
was program 100 through 199, or will display the program
number plus 100 if it was 000 to 099, since 000 to 099 cannot
be stored to.
3) If another storage location is desired, press either
VALUE
button until the desired program location is displayed.
4) Press the
STORE button a second time to save the program.
The STORE LED and the Edit dot in the display will both turn
off, and the function that was selected before
STORE was
pressed will be reselected.