Filter
Top Products
DESCRIPTION OF CONTROLS
11
DELAY/2
When in the EDIT mode, pressing the DELAY button will access either the
DELAY TIME or DELAY REGENERATION amount for editing, depending
which EDIT LED is lit. The DELAY TIME parameter allows the user to
adjust the time between repeats as required. The DELAY
REGENERATION parameter adjusts the number of repeats.
After pressing the
DELAY button, pressing the VALUE buttons will select
the desired DELAY TIME or REGENERATION levels.
When in the PROGRAM mode, this is button 2 of the keypad for
selecting a program by directly entering the desired program number.
CHORUS/3
When in the EDIT mode, pressing the CHORUS button will access either
the CHORUS ALGORITHM or CHORUS SPEED for editing, depending
which EDIT LED is lit. The ALGORITHM parameter offers selection of a
wide variety of chorused effects such as mono and stereo chorus, mono
and stereo flanging, variations of these with different depths and
feedback, etc.(see programming chart). The SPEED parameter affects
the sweep speed of the selected effect as required.
After pressing the
CHORUS button, pressing the VALUE buttons will select
the desired ALGORITHM choices or SPEED levels.
When in the PROGRAM mode, this is button 3 of the keypad for
selecting a program by directly entering the desired program number.
EQ/4
When in the EDIT mode, pressing the EQ button will access either the
INPUT EQ or EFFECT EQ, depending which EDIT LED is lit. The INPUT
EQ is a high-cut filter that determines the frequency response of the
incoming signal. The EFFECT EQ is a high-cut filter that is part of the
currently selected effect. For example, with effects that have reverb, the
EFFECT EQ determines the high frequency decay of the reverb. When
used with the Delay, the EFFECT EQ determines the high frequency
response of the regeneration (number of repeats).
After pressing the
EQ button, pressing the VALUE buttons will select the
desired EQ rolloff frequency point.
When in the PROGRAM mode, this is button 4 of the keypad for
selecting a program by directly entering the desired program number.