Filter
Top Products
SECTION 4
50
2) Press the
STORE button, which causes MIDIVERB III's entire
memory to be sent out via MIDI to an external storage device
like an Alesis DATADISK or another MIDIVERB III. The
display will read "____" while sending the data, which will take
about 1 second, after which it will return to "Snd".
---
RECEIVING PROGRAMS VIA MIDI
1) At any time, the MIDIVERB III can receive MIDI Program Data
(known as a Sysex dump). The display will read "____" while
receiving the MIDI data, which will take about 10 seconds due
to the time required to store 100 programs.
---
MIDI MAPPING
The next two buttons control what is known as MIDI program MAPPING,
which means that a single MIDI program number can be programmed to
select any of the MIDIVERB III's programs. For example, without MIDI
program MAPPING, selecting MIDI program 23 from an external MIDI
device would select program 23 on the MIDIVERB III. With MIDI
MAPPING, selecting MIDI program 23 on an external MIDI device could
select any program on the MIDIVERB III.
The MIDI MAPPING functions are global functions and are not stored
with an individual program.
For example, if the following program changes were desired:
MIDI Controller Program 101 = MIDIVERB III Program 33