Alesis MIXING CONSOLES Musical Instrument User Manual


 
SECTION 4
54
MISCELLANEOUS FUNCTIONS
INITIALIZING THE MIDIVERB III
There are two reasons why you may want to reinitialize your
MIDIVERB III :
1) To return all programs to their factory parameter settings (called
"initializing").
2) In case the unit locks up from a power surge.
To initialize your MIDIVERB III, do the following:
1) Turn the MIDIVERB III off.
2) Hold the
INT. PROG and STORE buttons.
3) Turn the MIDIVERB III on again while holding the above
buttons.
---
PLEASE NOTE:
This procedure will erase all user stored parameters and return all
MIDIVERB III parameters to their default values.
The MIDI program table will return to 000 through 199.
Programs 100 through 199 will become duplicates of factory
programs 000 through 099.
The display will be blank for about ten seconds while the memory is
initialized.
CAUTION: This procedure will erase all user programs from memory!!