Filter
Top Products
DESCRIPTION OF CONTROLS
9
SECTION 2
DESCRIPTION OF CONTROLS
FRONT PANEL
INPUT
The INPUT control is a stereo control that determines the master volume
level of the signal being fed into both inputs of the MIDIVERB III.
MIX
The MIX control determines the ratio of direct to effect signal. Full
counterclockwise (to the left) applies only direct signal to the outputs of
MIDIVERB III. Full clockwise (to the right) applies only effect signal to
the outputs.
OUTPUT
The OUTPUT control determines the output level of the MIDIVERB III's
stereo output jacks. Although this control is not programmable, it is
possible to program some of the output levels internally via software
(See Editing the Mix Levels).
CLIP INDICATOR
The red CLIP INDICATOR LED indicates the onset of distortion. This LED
should only light occasionally during normal use.
SIGNAL PRESENT LED
The green SIGNAL PRESENT LED indicates that a signal is currently being
fed into the MIDIVERB III. This LED should be frequently lit during
normal use.
LED DISPLAY
The MIDIVERB III contains an LED display which indicates the current
program number or parameter value.