Filter
Top Products
20 EUROPOWER PMP1000/PMP4000/PMP6000 User Manual
Power Supply
Mains voltage
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50/60 Hz
Europe/Australia 230 V~, 50 Hz
Japan 100 V~, 50 - 60 Hz
Fuse 100 - 120 V~ T 5 A H 250 V
Fuse 220 - 240 V~ T 5 A H 250 V
Power Consumption
Power consumption 500 W
Mains connector IEC standard receptacle
Dimensions/Weight
Dimensions (H x W x D) 4 ⁄ x 15 ⁄ x 16 ⁄"
122 x 390 x 425 mm
Weight 17.6 lbs / 8 kg
PMP4000
Microphone Inputs
Type XLR, electronically balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm -134 dB / 136 dB A-weighted
source resistance
@ 50 Ohm -131.5 dB / 134 dB A-weighted
source resistance
@ 150 Ohm -129 dB / 155 dB A-weighted
source resistance
Frequency response < 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain +10 dB, +60 dB
Max. input level +12 dBu @ +10 dB gain
Impedance approx. 2.6 kOhm balanced
approx. 1.3 kOhm unbalanced
Signal-to-noise ratio 109 dB / 112 dB A-weighted
(0 dBu In @ +10 dB gain)
Noise (THD + N) 0.002% / 0.0018% A-weighted
Mono Line Inputs
Type ¼" TS connectors, balanced
Impedance approx. 20 kOhm
Max. input level +21 dBu
Stereo Line Inputs
Type ¼" TRS connectors, unbalanced
Impedance > 3.6 kOhm
Max. input level +22 dBu
Equalizer
Low 80 Hz / +/-15 dB
Mid 2.5 kHz / +/-15 dB
High 12 kHz / +/-15 dB
2 Track Input
Type RCA
Impedance approx. 3.6 kOhm
Preamp Outputs
MAIN
Type ¼" TRS connectors, unbalanced
Impedance approx. 150 Ohm, unbalanced
Max. output level +21 dBu