Filter
Top Products
5 EUROPOWER PMP1000/PMP4000/PMP6000 User Manual
Introduction1.
Congratulations! With the PMP1000/PMP4000/PMP6000 you have acquired a
state-of-the-art power mixer that sets new standards. Right from the very start
it has been our goal to design a revolutionary unit that can be used for a wide
variety of applications. Indeed, this overwhelming power mixer gives you plenty
of functionality and a broad range of connection and expansion options.
Further advantages are the integrated Voice Canceller that removes vocal
passages from playbacks, the FBQ function, which detects feedback frequencies,
and the Speaker Processing function for loudspeaker alignment—all with a
resolution of 24 bits and 40 kHz. Plus, our tried and tested XENYX Mic Preamps
give you crystal-clear audio free of noise and distortion when using microphones.
BEHRINGER is a company with its roots in professional recording studio
technology. For many years we have been successful in developing products
for studio and live use. These include microphones and 19" units of all types
(compressors, enhancers, noise gates, tube processors, headphone amplifiers,
digital effects, DI boxes, etc.), monitor and P.A. speakers and professional
live and recording mixers. Our entire technical know-how has gone into your
PMP power mixer.
Before you get started1.1
Shipment1.1.1
Your PMP was carefully packed at the factory and the packaging is designed
to protect the unit from rough handling. Nevertheless, we recommend that
you carefully examine the packaging and its contents for any signs of physical
damage which may have occurred during transit.
If the unit is damaged, please do NOT return it to BEHRINGER, ◊
but notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be granted.
We recommend that you use a flight case, so as to give your power ◊
mixer optimum protection during use or transport.
Always use the original packing carton to prevent damage during ◊
storage or transport.
Make sure that children cannot play unsupervised with the device or ◊
its packaging.
Please ensure proper disposal of all packing materials.◊
Initial operation1.1.2
Be sure that there is enough air space around the unit for cooling and, to avoid
overheating, please do not place the EUROPOWER near radiators, etc.
Blown fuses must be replaced by fuses of the same type and rating! ◊
Please refer to the “Specifications” for details.
The mains connection is made using the enclosed power cord and a standard IEC
receptacle. It meets all of the international safety certification requirements.
Please make sure that all units have a proper ground connection. ◊
For your own safety, never remove or disable the ground conductor
from the unit or on the AC power cord.
To avoid damage on the device, do not
earth the loudspeaker outputs•
connect the loudspeaker outputs to each other•
connect the loudspeaker outputs to those of other amplifiers•
IMPORTANT NOTES CONCERNING INSTALLATION
The sound quality may diminish within the range of powerful broadcasting
stations and high-frequency sources. Increase the distance between the
transmitter and the device and use shielded cables for all connections.
Online registration1.1.3
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Should your
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
(http://behringer.com).
Registering your purchase and equipment with us helps us process your repair
claims more quickly and efficiently.
Thank you for your cooperation!
The manual1.2
This manual is designed to give you both an overview of all control elements and
to provide details about how to use them. To provide you with a clear structure,
we have grouped the control elements according to their function. They can
easily be found on the enclosed numbered illustrations. If you need more
detailed information on specific topics, please visit our web site at behringer.com.