Filter
Top Products
A-14
2 : Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
3 : Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
4 : Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
11 : Rotary
■
Function
This is a rotary speaker simulator.
■
Parameters
0 : Speed (Range: Slow, Fast)
Switches the speed mode between fast and
slow.
1 : Break (Range: Rotate, Stop)
Stops speaker rotation.
2 : Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from fast to slow.
3 : Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from slow to fast.
4 : Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow
speed mode.
5 : Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed
mode.
12 :Drive Rotary
■
Function
This is an overdrive - rotary speaker simula-
tor.
■
Parameters
0 : Overdrive Gain (Range: 0 to 127)
Adjusts overdrive gain.
1 : Overdrive Level (Range: 0 to 127)
Adjusts the output level of the overdrive.
2 : Speed(Range: Slow, Fast)
Switches the speed mode between fast and
slow.
3 : Break (Range: Rotate, Stop)
Stops speaker rotation.
4 : Fall Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from fast to slow.
5 : Rise Accel (Range: 0 to 127)
Adjusts acceleration when the speed mode is
switched from slow to fast.
6 : Slow Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the slow
speed mode.
7 : Fast Rate (Range: 0 to 127)
Adjusts speaker rotation speed of the fast speed
mode.
13 :Enhancer
■
Function
Enhances the outlines of the low range and
high range of the input signal.
■
Parameters
0 : Low Frequency (Range: 0 to 127)
Adjusts the low range enhancer frequency.
1 : Low Gain (Range: 0 to 127)
Adjusts the low range enhancer gain.
2 : High Frequency (Range: 0 to 127)
Adjusts the high range enhancer frequency.
3 : High Gain (Range: 0 to 127)
Adjusts the high range enhancer gain.
14 :Ring Modulator
■
Function
This is a ring modulator (AM modulator) that
makes it possible to modulate the frequency
of internal oscillator (OSC) in accordance with
an internal LFO.
■
Parameters
0 : OSC Frequency (Range: 0 to 127)
Sets the reference frequency of the internal
OSC.
1 : LFO Rate (Range: 0 to 127)
Adjusts the rate of the LFO.
2 : LFO Depth (Range: 0 to 127)
Adjusts the depth of the LFO.
3 : Wet Level (Range: 0 to 127)
Adjusts the level of the effect sound.
4 : Dry Level (Range: 0 to 127)
Adjusts the level of the original sound.
15 :Lo-Fi
■
Function
This is an effector that reproduces a retro-type
Lo-Fi sound using Noise Generator 1 (phono-
graph record player type scratch noise genera-
tor) and Noise Generator 2 (FM radio type
white noise and pink noise continuous noise
generator), and by noise modulation (ampli-
tude modulation = AM) and distortion of fre-
quency characteristics.
■
Parameters
0 : Noise Level 1 (Range: 0 to 127)
Adjusts the level of Noise Generator 1.
1 : Noise Density 1 (Range: 0 to 127)
Adjusts the noise density of Noise Generator
1.
2 : Noise Level 2 (Range: 0 to 127)
Adjusts the level of Noise Generator 2.
3 : Noise Density 2 (Range: 0 to 127)
Adjusts the noise density of Noise Generator
2.
4 : Tone (Range: 0 to 127)
Adjusts the tone.
5 : Resonance (Range: 0 to 127)
Adjusts the resonance of the sound.
703A-E-160A