Filter
Top Products
9
NOTE
• Do not plug in the power cord until all connections have been completed.
• When making connections, also refer to the operating instructions of the other components.
• Insert the plugs securely. Loose connections will result in the generation of noise.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Connect the cables to the correct input and output terminals.
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
Preparations
Cables used for connection
Select the cables according to the equipment being connected.
n For RCA input terminals
R
L
R
L
RCA pin plug cable (sold separately)
n For XLR input/output terminals and Balanced MIC input
Balanced cable (sold separately)
n For USB terminal
USB cable (supplied)
n For coaxial MIC input
Coaxial cable for MIC (sold separately)
n For booth/send output terminals
Balanced phone plug cable (sold separately)
Connections
Input terminal connection
Connecting external devices and MIC
R
L
R
L
R
L
R
L
R
L
R
L
R
L
R
L
AUDIO
RL
OUT
SIGNAL
GND
AUDIO
RL
OUT
AUDIO
RL
OUT
AUDIO
RL
OUT
External
device 2
Turntable 1CD player 1
External
device 1
When connecting devices
other than a turntable, set
the input change switch to
“LINE”.
When connecting
a turntable, set the
input change switch to
“PHONO”.
Balanced
MIC
Coaxial
MIC
n Balanced MIC connection
Connect a microphone to this balanced jack using an XLR connector.
Pin layout:
1. Ground (GND)
2. Hot (HOT)
3. Cold (COLD)
Suitable connector:
Cannon XLR-3-12C or equivalent.