Filter
Top Products
B-DEC 3O
20
fender.com
B-DEC™ 30 MIDI Configuration
In Utility Mode you can set MIDI CONTROL (menu 9) to AMP
or MIDI. If set to AMP, data sent on MIDI channel 16 will
control the amp, and channels 1-15 will be routed to the MIDI
synthesizer. This will present a problem if a normal MIDI song
is played with music on channel 16 (which could affect the
amp settings in unexpected ways). In this case you can either
delete channel 16 or move it to a different channel. If MIDI
CONTROL is set to MIDI, all MIDI data will be routed to the
MIDI synthesizer. MIDI on channel 16 is also passed from the
MIDI IN jack to the DSP during playback of songs or patterns
if the MIDI CONTROL is set to AMP.
B-DEC 30 MIDI Controls
If the MIDI CONTROL is set to AMP the following commands can be used(on CH 16).
Amp Control Control Type Value Range
Preset Num Program Change 0-113,127=Tuner
Amp Volume CC#07 0-127
MIDI Volume CC#11 0-127
Start/Stop MIDI CC#85 Don’t care
Play CC#86 Don’t care (Ignored if the
amp is busy playing a
pattern or song)
Record CC#87 Don’t care (Ignored if the
amp is busy playing a
pattern or song)
Overdub CC#88 Don’t care (Ignored if the
amp is busy playing a
pattern or song)
Data Increment CC#96 Don’t care
Data Decrement CC#97 Don’t care
Amp Gain CC#102 0-127
RVB Level CC#108 0-127
FX Level CC#110 0-127
FX Param1 CC#111 0-127
FX Param2 CC#112 0-127
FX Param3 CC#113 0-127
FX Param4 CC#114 0-127
Select Song CC#119 0-63 (Ignored if the amp
is busy playing a pattern
or song)
Access B-DEC 30 Drums from an External Controller
The B-DEC 30 MIDI synthesizer also contains a standard drum
kit accessible using MIDI channel 10 using a program change
value of 1 (which may be set on most MIDI controller devices).
Most MIDI notes on the keyboard correspond to a different
instrument within the standard drum kit (not all notes are
used). Other drum kits are available on MIDI channel 10 using
program change values 9, 17, 25, 26, 33, 41, 49, 57, or 127.