Filter
Top Products
DRIVE/AMPCABINETPRE EFFECT
MODULATION
DELAYREVERB Effect Type Tuner
29
6. CHORUS/FLANGER (CHO/FLNG)
This is a chorus/flanger unit with a standard circuit structure.
7. OCTAVE
This models a pedal that generates a pitch one octave below the original input,
mixing it with the original sound to add thickness.
HINT: This type of effect only works with single notes; chords will confuse it.
8. RING MOD
This is a ring modulator; an effect that uses an oscillator to generate a sine wave
which is then multiplied with the signal from your bass to produce new harmonics.
If you assign the OSCFREQ control to the expression pedal, you’ll be able to con-
trol the sound in unique ways while you perform.
9. FRETLESS
This effect transforms the sound of a fretted bass into that of a fretless bass.
HINT: This effect is designed for single-note playing. The sound may be muddy if
you play a chord.
10. SLOW ATTACK (SLOWATK)
This models a “slow attack” effect that slows down the attack of the bass to create
a violin-like impression.
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED” 0.1–10.0 [Hz] * Adjusts the modulation speed.
[3] “MANUAL” 1.0–10.0 * Adjusts the center frequency of the sweep.
MANUAL has no effect if DEPTH is set to
10.
[4] “RESO” 0.0–10.0 * Adjusts the amount of resonance.
[4] “DIRECT” 0.0–10.0 * Adjusts the mix level of the original sound.
[5] “EFFECT” 0.0–10.0 * Adjusts the mix level of the note one octave
below.
[2] “FILTER” 1.0–10.0 * Adjusts the filter cutoff frequency.
[3] “OSCFREQ” 0.0–10.0 * Adjusts the oscillator frequency.
[4] “DIRECT” 0.0–10.0 * Adjusts the mix level of the original sound.
[5] “EFFECT” 0.0–10.0 * Adjusts the mix level of the effect sound.
[1] “DEPTH” 0.0–10.0 * Adjusts the degree of “fretlessness.”
[2] “ATTACK ” 0.0–10.0 * Adjusts how the attack is modified.