Filter
Top Products
DRIVE/AMPCABINETPRE EFFECT
MODULATION
DELAYREVERB Effect Type Tuner
33
7. ROTARY
This models a stereo rotary speaker. When you adjust the speed, it will take a cer-
tain amount of time for the specified speed to be reached – just like on an actual
rotary speaker. This is because it takes several seconds for the motor that creates
the rotation to accelerate or decelerate.
8. PITCH SHIFTER (PITCH)
This is a pitch shifter with a range of two octaves up or down, rivaling sophisticated
rack-mounted signal processors.
NOTE: If you assign the PITCH knob to the expression pedal, you can use the
pedal to control the pitch change.
(p.41 Using the expression pedal to control param-
eters)
[1] “DEPTH” 0.0–10.0 * Adjusts the modulation depth.
[2] “SPEED 1” 0.1–10.0[Hz] * Adjusts the rotational speed of the speaker. If
you assign “ROT SPD” to the CONTROL
switch, this will be the SLOW speed. This
knob is effective even if you’re not using the
CONTROL switch.
(p.44 Control switch set-
tings)
[4] “SPEED 2” 0.1–10.0[Hz] * Adjusts the rotational speed of the speaker. If
you assign “ROT SPD” to the CONTROL
switch, this will be the FAST speed. This
knob will not function if you’re not using the
CONTROL switch.
(p.44 Control switch set-
tings)
[5] “ACCEL” 1.0–10.0 * Adjusts the time it takes for the rotational
speed to change. With higher settings, the
change will take more time.
CONTROL
switch ROT SPD If you select “ROT SPD” as the CONTROL
switch setting, the rotation speed will alter-
nate between SLOW/FAST (SPEED 1/
SPEED 2) each time you press the CON-
TROL switch. This lets you control the effect
just as on an actual rotary speaker.
(p.44
Control switch settings)
[1] “PITCH”–24–+24 * Adjusts the pitch in semitone steps.
[2] “FINE”–50–+50 * Adjusts the pitch in one-cent units.
[3] “TRACKING”10–150 [ms] Adjusts the tracking of the pitch shifter (i.e.,
how closely it will follow). Shorter settings are
effective if the PITCH setting is close to 0,
and longer settings are effective if the PITCH
setting is close to +/–24. While listening to
the pitch-shifted sound, adjust this so that
playing is easier.
[4] “DIRECT” 0.0–10.0 * Adjusts the level of the direct sound.
[5] “EFFECT” 0.0–10.0 * Adjusts the level of the effect.