Filter
Top Products
42
SETTING THE EXPRESSION TARGET
Here are the items you can set.
When you’ve pressed the EXP/CTL button to make it blink, you’ll be able to set the
following items by turning value knobs 1–3.
NOTE: You can set the above items individually for each program. If you switch to a
different program or turn off the power without saving, any changes you’ve made
will be lost.
Using the same example we described earlier when explaining Quick Assign,
here’s how to assign the expression pedal to control the PITCH parameter of the
PITCH SHIFTER modulation effect.
1. Use the MODULATION selector to select PITCH SHIFTER. If PITCH
SHIFTER is already selected, turn the selector to choose a different effect, and
then re-select PITCH SHIFTER.
NOTE: If you change the effect type of a parameter that is assigned to the expres-
sion target, the target will be initialized to a setting of “--OFF--”. (However, “D/
INPUT”, “R/INPUT” are exceptions.)
HINT: If you’ve set the Pre-effect type to “WAH,” the “P/MANUAL” (wah position) will
automatically be assigned to expression. If you then set the Pre-effect to a different
type without making any further settings, the target setting will also automatically
return to the former setting.
2. Press the EXP/CTL switch.
3. Either press the (R) switch or turn value knob 1 to make the value display indi-
cate “EP.”
4. Use the ▲/▼ buttons or turn value knob 1 to make the name display read “M/
PITCH”. The PITCH parameter of the PITCH SHIFTER effect has now been
assigned to the expression pedal. Also, the icon will appear in the LCD
display.
NOTE: Unlike other parameters, PITCH is not edited when you control it from the
expression pedal. This is so that the pitch will change smoothly even when MIN
and MAX are set to values that are close to each other (i.e., when you’ve made set-
tings so that the pedal produces only a small amount of pitch change).
NOTE: Nothing will be controlled if the target effect is “--OFF--.”
“*/######”: EXP expression target (value display indicates EP) Value knob 1
“EXP MIN”: EXP (expression pedal) target range (minimum value) Value knob 2
“EXP MAX”: EXP (expression pedal) target range (maximum value) Value knob 3