Filter
Top Products
Parameters
24
Merge Lower Msg (Merge Lower Message) [Off, On]
On: MIDI messages of the channel specified by the
Global mode Group 2 “MIDI Lower Rx Ch” parameter
will be converted to the channel specified by the
Global mode Group 2 “MIDI Lower Tx Ch” and
transmitted.
Group 5
CC# Upper DB Sel (MIDI Control Change Assign for
Upper Drawbar Select) [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the UPPER setting of the
DRAWBAR SELECT section. (The factory setting is
79.)
CC# Lower DB Sel (MIDI Control Change Assign for
Lower Drawbar Select) [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the LOWER setting of the
DRAWBAR SELECT section. (The factory setting is
80.)
CC# DB1–1 (MIDI Control Change Assign for Drawbar
1–16') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 16' setting of Draw-
bar 1. (The factory setting is 16.)
CC# DB1–2 (MIDI Control Change Assign for Drawbar
1–5-1/3') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 5-1/3' setting of
Drawbar 1. (The factory setting is 17.)
CC# DB1–3 (MIDI Control Change Assign for Drawbar
1–8') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 8' setting of Drawbar
1. (The factory setting is 18.)
CC# DB1–4 (MIDI Control Change Assign for Drawbar
1–4') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 4' setting of Drawbar
1. (The factory setting is 19.)
CC# DB1–5 (MIDI Control Change Assign for Drawbar
1–2-2/3') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 2-2/3' setting of
Drawbar 1. (The factory setting is 20.)
CC# DB1–6 (MIDI Control Change Assign for Drawbar
1–2') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 2' setting of Drawbar
1. (The factory setting is 21.)
CC# DB1–7 (MIDI Control Change Assign for Drawbar
1–1-3/5'’) [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 1-3/5' setting of
Drawbar 1. (The factory setting is 22.)
CC# DB1–8 (MIDI Control Change Assign for Drawbar
1–1-1/3') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 1-1/3' setting of
Drawbar 1. (The factory setting is 23.)
CC# DB1–9 (MIDI Control Change Assign for Drawbar
1–1') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 1' setting of Drawbar
1. (The factory setting is 24.)
CC# DB2–1 (MIDI Control Change Assign for Drawbar
2–16') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 16' setting of Draw-
bar 2. (The factory setting is 70.)
CC# DB2–2 (MIDI Control Change Assign for Drawbar
2–5-1/3') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 5-1/3' setting of
Drawbar 2. (The factory setting is 71.)
CC# DB2–3 (MIDI Control Change Assign for Drawbar
2–8') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 8' setting of Drawbar
2. (The factory setting is 72.)
CC# DB2–4 (MIDI Control Change Assign for Drawbar
2–4') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 4' setting of Drawbar
2. (The factory setting is 73.)
CC# DB2–5 (MIDI Control Change Assign for Drawbar
2–2-2/3') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 2-2/3' setting of
Drawbar 2. (The factory setting is 74.)
CC# DB2–6 (MIDI Control Change Assign for Drawbar
2–2') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 2' setting of Drawbar
2. (The factory setting is 75.)
CC# DB2–7 (MIDI Control Change Assign for Drawbar
2–1-3/5'’) [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 1-3/5' setting of
Drawbar 2. (The factory setting is 76.)
CC# DB2–8 (MIDI Control Change Assign for Drawbar
2–1-1/3') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 1-1/3' setting of
Drawbar 2. (The factory setting is 77.)
CC# DB2–9 (MIDI Control Change Assign for Drawbar
2–1') [1...31, 33...95, Off]
Specify the MIDI control change number that will be
used to transmit and receive the 1' setting of Drawbar
2. (The factory setting is 78.)