Filter
Top Products
44
Adding an ending
1
While automatic accompaniment
is playing, press the [INTRO/
ENDING 1] switch or the
[INTRO/ENDING 2] switch
The ending will be played, and then the
accompaniment will stop automatically.
The switch indicator of the selected ending
will continue blinking until the playback
switches to that ending. After the ending
has begun, the indicator will be lit until
playback ends. After the ending, automatic
accompaniment will stop automatically.
To cancel the ending before it is finished
If you change the setting of the “Varia-
tion” Cell or press the [FILL 1, 2] switch
after the accompaniment has switched to
the ending, the accompaniment will
move to the selected variation or fill from
the next beat or the next measure, and
automatic accompaniment will continue
Adding a fill
1
While automatic accompaniment
is playing, press the [FILL 1]
switch or [FILL 2] switch
A fill-in will be inserted. When the fill
ends, the accompaniment will switch to
the variation you specified in the
“AfterFill1” or “AfterFill2” cell, just as for
the intro.
The timing at which the accompaniment
changes from the variation to the fill is
adjusted automatically to create a natural
transition. However, depending on the timing
at which you press the switch, only the latter
part may be played, so it is important to pay
attention to the timing.
To change the variation after a fill
You can specify the variation to which auto-
matic accompaniment will change when fill
1 has finished.
“After Fill1” cell: Specify the variation that
the accompaniment will use after fill 1 has
ended, when you press the [FILL 1] switch
during rhythm style playback.
“Off”: When fill 1 ends, you will return to the
variation that had been selected immediately
before the fill began.
Var 1&2: If Fill 1 ends when Variation 1 or
Variation 2 are selected, Variation 1 and Varia-
tion 2 will be selected alternately.
Var 1&3: If Fill 1 ends when Variation 1 or
Variation 3 are selected, Variation 1 and Varia-
tion 3 will be selected alternately.
Var 1&4: If Fill 1 ends when Variation 1 or
Variation 4 are selected, Variation 1 and Varia-
tion 4 will be selected alternately.
Var 2&3: If Fill 1 ends when Variation 2 or
Variation 3 are selected, Variation 2 and Varia-
tion 3 will be selected alternately.
Var 2&4: If Fill 1 ends when Variation 2 or
Variation 4 are selected, Variation 2 and Varia-
tion 4 will be selected alternately.
Var 3&4: If Fill 1 ends when Variation 3 or
Variation 4 are selected, Variation 3 and Varia-
tion 4 will be selected alternately.
“Var+”: When fill 1 ends, accompaniment will
switch to the variation to the right of the varia-
tion that had been selected when the fill
began.
“Var-”: When fill 1 ends, accompaniment will
switch to the variation to the left of the varia-
tion that had been selected when the fill
began.
“After Fill2” cell: Specify the variation that
the accompaniment will use after fill 2 has
ended, when you press the [FILL 2] switch
during rhythm style playback. The selection
is the same as for “After Fill 1.”
Selecting the most appropriate
program for a Rhythm Style
1
Press the [SINGLE TOUCH]
switch
When you turn on the [SINGLE TOUCH]
switch and select a rhythm style, a sound
and automatic accompaniment settings
suitable for that style will be selected.
Settings that will be made
• Keyboard sound, and pan, volume,
octave and sound selections for the
Upp1, Upp2, and Low parts
• On/off status of [SPLIT] and [LAYER],
and the status of the “KeyL” check box
• “FullKeyboard” select status
• [ENSEMBLE] on/off status and
selected type