Filter
Top Products
63
Functions
Functions
1. Adjusting the pitch
Fine adjustments to the pitch
Here’s how you can make fine adjustments to the
pitch.
When you are playing together with other instru-
ments, you can use this function to tune the SP-500
to the other instruments.
The pitch can be adjusted in half-step (0.5) Hz
intervals over a range of 427.5 – 453.0 Hz (Hertz).
The factory setting is A4=440 Hz.
1
Press the [FUNCTION] switch
The [FUNCTION] switch indicator will
light, and the “Func 1/10” page will
appear.
2
Adjust the “Tune” cell
Use the dial or the [VALUE] switches to
adjust the value of the “Tune” cell.
To write settings into internal memory
In the “Func 7/10” page, execute “Write”
button.
If you turn off the power without writing,
the previous settings will reappear.
To return to the previous display
If you press the [EXIT] switch or the
[FUNCTION] switch, the [FUNCTION]
switch indicator will go dark, and you
will return to the previous LCD screen.
Changing the key (Transposing)
When you wish to play a song that is written in a
difficult key (e.g., f#, c# etc.), or when you need to
tune to another instrument or accompany a vocalist
it is convenient to use this function. This function
also allows you to use familiar fingerings to play
songs.
1
Press the [FUNCTION] switch
2
Change the “Transpose” setting
Press the “Transpose” cell “▲” or “▼” to
change the setting.
The available range is –11 – +11.
When the power is turned off, this will be set
to “0.”
To return to the previous display
If you press the [EXIT] switch or the
[FUNCTION] switch, the [FUNCTION]
switch indicator will go dark, and you
will return to the previous LCD screen.
Example 1: To play a song a semitone
higher
Set the “Transpose” setting to “+1.”
With this setting, pressing the C key will
sound like a C#. If the pitch has been
raised a semitone as in this example,
playing the notes shown at the lower left
will produce the pitches shown at the
lower right.
Example 2: Using G fingering to play a
song in B
Set the “Transpose” setting to “+3.”
Bb is a minor third above G (three semi-
tones higher). Thus, we will make set-
tings so that when the C key is pressed,
the D# note (three semitones above C) is
played.