Filter
Top Products
128
Global edit environment
Page 7 - MIDI IN Controls (1)
PAGE 7 - MIDI IN CONTROLS (1)
This page is where you can program the Chord Recognition
channels for the internal arranger, and a fixed velocity value
for all notes appearing at the input.
There are two separate Chord channels. This is very useful
when you must send chords to Pa50 on two channels (like
with some MIDI Accordions).
Chord1 channel
Notes entering this channel are sent to the Chord Recogni-
tion engine.
Chord2 channel
Notes entering this channel are sent to the Chord Recogni-
tion engine.
Velocity Input
Use this parameter to set a fixed velocity (dynamics) value for
all MIDI notes entering. This is useful when playing the Pa50
with an organ or a MIDI Accordion.
Normal Normal velocity values are received.
40…127 All received velocity values are converted to the
selected value.
PAGE 8 - MIDI IN CONTROLS (2)
This is another page containing various MIDI IN settings,
like note transposition for the Realtime tracks. The transpose
parameters are useful to many MIDI accordion players,
whose MIDI interface may transmit on an unexpected
octave.
UppOct (Upper Octave)
Octave transposition of data received on the MIDI IN for the
Upper tracks. For example, if you select the +1 value, a
received C4 will play a C5 on the Pa50.
LowOct (Lower Octave)
Octave transposition of data received on the MIDI IN for the
Lower track. For example, if you select the +1 value, a
received C4 will play a C5 on the Pa50.
OctIn (Octave In)
Enables/disables the octave transposition of data received via
MIDI.
On Data received via MIDI can be transposed,
according to the selected Octave Transposition.
For example, if the Octave Transposition is +1,
a received C4 will actually play a C5.
Off Data received via MIDI can’t be transposed by
the Octave Transposition applied to the track.
For example, if the Octave Transposition is +1,
a received C4 will still play a C4.
Mute In
Use this parameter to determine if a muted track can still play
data received via MIDI.
On No data received via MIDI on a muted track
can be played by Pa50.
Off Data received via MIDI on a muted track can
still play on the Pa50.
Chord1 channel:Off
Chord2 channel:Off
Velocity In:Normal
Gbl:MidiIn Ctl 1
UppOct:+1 OctIn:Off
LowOct:+0 MuteIn:Off
Gbl:MidiIn Ctl 2