Filter
Top Products
134
Disk edit environment
Page 1 - Load
When the operation is completed (the “Wait” indicator
disappears), the source page comes back in the display,
and you may perform further loading operations.
Note: Data loaded from disk, and data already in memory
is merged. For example, if there is data in all three USER
Style banks in memory (USER01, USER02, USER03), and
there is only the USER01 Style bank on disk, the USER01
bank is overwritten, while USER02 and USER03 banks
are left unchanged.
As a result, you will have a STYLE folder in memory con-
taining the USER01 bank you just loaded, and the old
USER02 and USER03 banks.
Loading all data of a specified type
You can load all User data of a specified type (User Programs,
User Styles, Performances) with a single operation.
1. Insert the source disk into the disk drive.
2. Press F1 to scan the disk and show the file list.
3. Use the E-H (Scroll) buttons (or the TEMPO/VALUE
controls) to select the “.SET” folder containing the data
you wish to load.
Move the folder to the first line of the display. If the
folder you are looking for is in another folder, use the F3
(Open) button to open it. Use the F4 (Close) button to
go back to the parent folder.
4. Press F3 (Open) to open the “.SET” folder. A list of User
data appears (Performance, Program, Style, Global).
5. Use the E-H (Scroll) buttons (or the TEMPO/VALUE
controls) to move the data type you are looking for to
the first line of the display.
6. Press F2 (Load) to confirm your selection. The “Are you
sure?” message will appear. Press ENTER to confirm, or
EXIT to abort.
When the operation is completed (the “Wait” indicator
disappears), the source page comes back in the display,
and you may perform further loading operations.
Note: Data loaded from disk, and data already in memory
are merged. For example, if there is data in all three USER
Style banks in memory (USER01, USER02, USER03), and
there is only the USER01 Style bank on disk, the USER01
bank is overwritten, while USER02 and USER03 banks
are left unchanged.
As a result, you will have a STYLE folder in memory con-
taining the USER01 bank you just loaded, and the old
USER02 and USER03 banks.
Loading a single bank
You can load a single bank of User data (User Programs, User
Styles, Performances) with a single operation. A bank corre-
sponds to a STYLE or PROGRAM/PERFORMANCE button.
1. Insert the source disk into the disk drive.
2. Press F1 to scan the disk and show the file list.
3. Use the E-H (Scroll) buttons (or the TEMPO/VALUE
controls) to select the “.SET” folder containing the data
you wish to load.
Move the folder to the first line of the display. If the
folder you are looking for is in another folder, use the F3
(Open) button to open it. Use the F4 (Close) button to
go back to the parent folder.
4. Press F3 (Open) to open the “.SET” folder. A list of User
data appears (Global, Performance, Program, Style).
5. Use the E-H (Scroll) buttons (or the TEMPO/VALUE
controls) to move the data type you are looking for to
the first line of the display.
6. Press F3 (Open) to open the selected folder. A list of
User banks appears.
7. Use the E-H (Scroll) buttons (or the TEMPO/VALUE
controls) to move the desired bank to the first line of the
display.
8. Press F2 (Load) to confirm the file selection. The list of
User banks in memory appears.
In the page above, the previously selected Style bank will
be loaded into the bank 1 (USER1 button) in memory.
The existing Styles in memory will be deleted and over-
written.
9. Scroll the available locations in memory, using the E-H
(Scroll) buttons (or the TEMPO/VALUE controls).
10. When the target bank is selected (i.e., it is in the first line
of the display), press F2 (Load) to load the bank. The
“Are you sure message” will appear. Press ENTER to
confirm, or EXIT to abort.
Warning: After confirming, all User data contained in the
bank in memory is deleted.
PERFORM |
PROGRAM
STYLE |
FD LOAD OPEN CLOSE
Disk:Load
PERFORM |
PROGRAM
STYLE |
FD LOAD OPEN CLOSE
Disk:Load
USER01.STY |
USER02.STY
USER03.STY |
FD LOAD OPEN CLOSE
Disk:Load
User01 |
User02
User03 |
FD LOAD OPEN CLOSE
Disk:Load