Filter
Top Products
13
INItIALIzING/FoRMAttING A coMPAct FLASh cARd
To initialize or format a Compact Flash card:
Press the Back button until the Preset screen appears.1.
Press the Machine button until System View is displayed.2.
Press the Select knob to enter the System Menu.3.
Turn the Select knob until Card Config is highlighted.4.
Press the Select knob to access the Compact Flash Menu.5.
Press Knob B to Format the card OR press Knob C to initialize the card.6.
cReAtING A NeW SySteM PReSet
One way to create a new System Preset is to edit an existing System Preset
and save it to the User or Card category. Another way is to start from
scratch, as described below.
With any System Preset loaded, press the Select knob. The System menu 1.
appears.
Highlight Machine Config with the Select knob, and press the Select 2.
knob. The available DSP configurations appear.
Turn the Select knob to highlight a configuration and press the Select 3.
knob to choose it. You return to the Preset Screen. The preset’s name
indicates the configuration you just selected (for example, if you selected
the Cascade Stereo configuration, the preset’s name is Cascade Stereo
Config).
Press the Machine button to select a Machine Preset within your System 4.
Preset.
Press the Back button to access the Preset Category menu.5.
Turn the Select knob to highlight a category and press the Select knob to 6.
choose it. A flashing Machine Preset name appears.
Turn the Select knob to choose a Machine Preset and press the Select 7.
knob to load it.
Press the Machine Button to choose the next Machine Preset (if there is 8.
one) and repeat steps 5 through 7.
Repeat step 8 for each virtual machine in your System Preset.9.
Press the Machine Button until your System Preset is selected.10.
Press the Store button and follow the Storing a Preset procedure 11.
described on page 12.