Filter
Top Products
17
tons in the row at the top of the third control area (in the example above,
I/O Levels, Input Control, Shape, etc.). Some parameters appear as drop-
down menus; click the menu to open it, and click on an option to select it.
When you move a parameter’s slider, an arrow appears where the slider’s
default position is. To return a preset to its default, click on the arrow or
move the slider toward the arrow until the arrow disappears.
the PcM96 PLUG-IN coNtRoL PANeL
You can manage various network- and software-related aspects of the
PCM96 with the Control Panel. To open the Control Panel, click the
PCM96ControlPanel icon located in the System Preferences menu on your
computer.
Repair
Click to re-initialize communication between the PCM96 and your com-
puter.
PCM96 Communication
Click to check the connection status between the PCM96 and your com-
puter, and to open the PCM96 Setup dialog (described on page 18).
About
Click to see the names of the PCM96 development team, and to check for
software updates.
Name
Assign a name to your PCM96 to identify it on a network.
ID
Assign a number to your PCM96 for network purposes.
Audio Source
Controls the PCM96 unit’s Audio Source parameter. Select Analog or AES.
Clock Source
Controls the PCM96 unit’s Clock Source parameter. Select Internal, AES or
BNC.
Clock Rate
Controls the PCM96 unit’s Clock Rate parameter. Select 44.1 kHz, 48 kHz,
88.2 kHz, or 96 kHz.
Locate
Click to make the PCM96 display flash, so you can easily find the curently
selected PCM96 in a large rack full of PCM96’s.
Update
Click to automatically update the PCM96 software via the Internet.