Filter
Top Products
27
USING MIdI
The MIDI Control menu is where all MIDI related control is changed. See
page 24 for information about the MIDI Control menu.
MIdI IMPLeMeNtAtIoN
The PCM96 offers MIDI implementation for use with external MIDI hard-
ware and software controllers. You can connect up to three PCM96 units
to a single MIDI controller. You can also slave two or more PCM96 units
together by connecting a cable from the MIDI Out port of the master to
the MIDI In port of the slave. Additional PCM96 units can be slaved to the
master by connecting a cable from the MIDI Thru port of one slave unit to
the MIDI In port of the next unit.
The MIDI implementation for the PCM96 is very basic. The implementa-
tion is fixed, but there is a user interface for modifying basic parts of it.
NoMeNcLAtURe
Numbering in MIDI (channel number and program numbers, for example),
can be confusing since some sources start counting from zero and others
start from one. This description will start from zero.
hoW to LoAd PReSetS WIth MIdI
Because of the large number of potential presets in the PCM96, Preset
Change messages are used along with the Bank Select extension to provide
MIDI preset selection. Controller 32 is used to select the current preset
bank. Controller 32 is sent to the system (to select the desired bank), fol-
lowed by a Preset Change message to select a preset. The Bank values are
“sticky,” meaning the PCM96 will remember the Bank values for each MIDI
channel. It is not necessary to send a Bank change with each Preset Change
unless the Bank has indeed changed.
See page 29 for a bank/preset map. To see a preset’s bank on the PCM96,
press Knob C while viewing the Preset screen.
hoW to ASSIGN A bASe chANNeL to the PcM96
The base channel identifies a PCM96 unit to a MIDI device. Add 1, 2, 3, or
4 to the unit’s base channel to identify virtual machines within the unit. You
can connect up to three PCM96 units to a single MIDI device.
To assign a base channel to the PCM96:
Press the Back button until the Preset screen appears.1.
Press the Machine button until System View is displayed.2.
Press the Select knob to enter the System Menu.3.
Turn the Select knob until Midi Control is highlighted.4.
Press the Select knob to access the Midi Control Menu.5.
Turn the Select knob until Base Channel is highlighted.6.
Turn Knob B to select the base channel (0-15).7.
Press the Back button twice to return to the Preset screen.8.
Now the PCM96 unit is identified by the selected base channel, and virtual
machines 1, 2, 3, and 4 within the PCM96 are identified by the base chan-
nel plus 1, 2, 3, and 4, respectively.