Mackie DX810 Musical Instrument User Manual


 
DX810 31
DX-810
Audio
Noise
(20 Hz-20 kHz bandwidth, Master Out, channel Trims @ unity gain,
channel EQs flat, all odd channels panned left, even channels
panned right):
Master level @ unity, channel levels @ unity: 82 dBu
Single channel to Master Out: 100 dBu
(referenced to 1% THD+N)
Total Harmonic Distortion (THD+N)
(1 kHz @ +10 dBu (unity level) 20 Hz-20 kHz):
Mic in to Master Out: < 0.005%
Crosstalk
(1 kHz relative to 0 dBu, 20 Hz-20 kHz bandwidth, any line input to
adjacent Direct Out):
Trim to unity: < 90 dB
Frequency Response
Mic input to any output: 20 Hz20 kHz, ±0.5 dB
Equivalent Input Noise (EIN)
Mic in to Direct out, max gain, 150 ohm termination:
129.5 dBm unweighted
Common Mode Rejection (CMR)
Mic in to Direct out, max gain, 1 kHz signal: better than 80 dB
Maximum and Nominal Levels and Ranges
Mic inputs: +18 dBu, +4 dBu,
0 to 60 dB gain
Line inputs: +18 dBu, +4 dBu,
30 to +30 dB gain
Bus A/B inputs: +18 dBu, +4 dBu,
20 to +20 dB gain
All outputs: +18 dBu, +4 dBu
Impedances
Mic inputs: 1.3K ohms
Line inputs: 40K ohms
All other inputs: 10K ohms or greater
All outputs: 120 ohms
PHYSICAL
Dimensions (HxWxD): 3.5"/2 RU (89mm) x 19" (483mm) x
13.25" (337mm)
Net Weight: 12.9 lbs. (5.9 kg)
ELECTRICAL
AC Power: 90240 VAC, 50/60 Hz, 1.0 A
DC Power: 24 VDC, 3 A
Phantom Power: +48 VDC, current limited to 7 mA
per input channel
Fuse Ratings: 1.6 A Slo Blo, 250 V
PC SYSTEM REQUIREMENTS
OS: Windows® 95, 98, NT®, 2000, XP
Processor: Pentium® or faster
RAM: 16 MB minimum
32 MB recommended
Storage: 10 MB free disk space
Display: 800x600 pixels, 256 colors minimum