Filter
Top Products
User’s Guide
FX Routing
The Plug-in Con guration Window
Card Slot Col umn
Card B
Card C
Card A
Plug-in
display tog gle
display tog gle
Input Source
Assignment
Input Source
Assignment
Input Source
Column
Plug-in
Assignment
Column
Close Window
Destination
Assignment
Col umn
Card D
Stereo/Mono
Mode Column
Stereo/Mono
Toggle But ton
Inserting a Plug-in into a Channel
A pre- or post-DSP channel
insert can also be used as the input source for a plug-in.
When a channel insert point is selected, the plug-in output returns to the channel by
default. The FX return path is disconnected, although the plug-in output is still dis-
played on the FX return channel meter.
A plug-in channel insert assignment can be made from the Plugin Con guration win-
dow, or from a pull-down menu from the mixer screen.
Plug-in Con guration Win dow
Pre-DSP Pull-down
Post-DSP Pull-down
This assignment can also be made from the control surface and VFD by holding the
desired chan nel’s SELECT button for two seconds, then paging over to Plug Pre or
Plug Post, selecting the input source, then selecting the desired plug-in slot from the
follow-on menu.