Filter
Top Products
User’s Guide
Unlock Procedure
1.
Locate your D8B’s Electronic Serial Number (ESN). This is displayed at the
bottom of the Licensing window, which is accessed from the Setup screen.
The 12-digit ESN is made from numbers 0–9 and letters A–F. It is unique to
the D8B processor, and is not the same as the serial number on the rear of
the control surface or CPU chassis.
2.
You will also need your plug-in’s serial number.
3.
To obtain the unlock code, have the ESN and plug-in serial number ready.
Then you have two options:
• Log on to the Mackie plug-in authorization web page:
http://www.mackie.com/D8Bauthorize.htm
or
• Telephone Mackie Tech Support at 800-258-6883.
4.
When you have obtained an unlock code, open the D8B Setup window, and
click
Licensing
.
5.
With your plug-in highlighted in the Licensing window, click
Authorize
, and
enter your unlock code in the UNLOCK CODE box. Click
Enter
, and enjoy
your newly expanded console.
An Unlocked
Plug-in
D8B SETUP screen’s
LICENSING window
D8B Electronic
Serial Num ber (ESN)
AUTHORIZE
LICENSING