Filter
Top Products
Appendix
MIDI Mode: Messages and Sub-Parameters
Modulation Wheel, Faders, Expression Pedal
Available MIDI Message Types:
Parameter
MIDI
Message
Display
MIDI CC 0 – 127 MIDI CC ->
RPN 128 RPN Define ->
NRPN 129 NRPN Define ->
Control Disable * - Control OFF
MIDI CC Sub-Parameters:
Sub-
Parameter
Value
Range
Display
CC# 0 – 127 CC#: 0 – 127
Minimum Value 0 – 127 Min. Value:
Maximum Value 0 – 127 Max. Value:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
USB, Ext,
USB+Ext, Global
Out:
RPN and NRPN Sub-Parameters:
Sub-Parameter Value Range Display
LSB 0 – 127 LSB:
MSB 0 – 127 MSB:
Minimum Value 0 – 127 Min. Value:
Maximum Value 0 – 127 Max. Value:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
USB, Ext,
USB+Ext, Global
Out:
Resolution Coarse, Fine Reso:
Knobs
Available MIDI Message Types:
Parameter
MIDI
Message
Display
MIDI CC 0 – 127 MIDI CC ->
RPN 128 RPN Define ->
NRPN 129 NRPN Define ->
Control Disable * - Control OFF
MIDI CC Sub-Parameters:
Sub-
Parameter
Value
Range
Display
CC# 0 – 127 CC#: 0 – 127
Minimum Value 0 – 127 Min. Value:
Maximum Value 0 – 127 Max. Value:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
USB, Ext,
USB+Ext, Global
Out:
Data Format **
Norm, RBOff,
Rel2C, SignB1,
SignB2, 1Step
Data:
RPN and NRPN Sub-Parameters:
Sub-Parameter Value Range Display
LSB 0 – 127 LSB:
MSB 0 – 127 MSB:
Minimum Value 0 – 127 Min. Value:
Maximum Value 0 – 127 Max. Value:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
USB, Ext,
USB+Ext, Global
Out:
Resolution Coarse, Fine Reso:
Trigger Pads
Available MIDI Message Types:
Parameter MIDI Message Display
MIDI Note
Note C-2 to G8
(0 – 127)
MIDI Note ->
MIDI CC 128 – 255 MIDI CC ->
RPN 256 RPN Define ->
NRPN 257 NRPN Define ->
Control Disable * - Control OFF
Note C-2 to G8 Sub-Parameters:
Sub-
Parameter
Value
Range
Display
MIDI Note
Note C-2 to G8
(0 – 127)
Note: C-2 – G8
(0 – 127)
Minimum Value 0 – 127 Min. Value:
Maximum Value 0 – 127 Max. Value:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
Global, USB,
Ext, USB+Ext
Out:
Sub-parameters for trigger pad MIDI CC, RPN, and NRPN
messages are the same as the Modulation Wheel, Faders,
Expression Pedal section above.
** Data Format Settings
• Norm: Standard operation
• RBOff: Relative (binary offset)
• Rel2C: Relative (two's complement)
• SignB1: Signed bit 1
• SignB2: Signed bit 2
• 1Step: Single step
* When Control OFF appears on the LCD, you can press the
center Directional button to disable MIDI output from the
selected control. Press the center Directional button again on
another parameter to re-enable it.
* When Control OFF appears on the LCD, you can press the
center Directional button to disable MIDI output from the
selected control. Press the center Directional button again on
another parameter to re-enable it.
* When Control OFF appears on the LCD, you can press the
center Directional button to disable MIDI output from the
selected control. Press the center Directional button again on
another parameter to re-enable it.