Filter
Top Products
Fader Buttons, Sustain Pedal
Available MIDI Message Types:
Parameter MIDI Message Display
MIDI CC 0 – 127 MIDI CC ->
RPN 128 RPN Define ->
NRPN 129 NRPN Define ->
Program
Change
130 Prg.Change ->
MIDI CC Sub-Parameters:
Sub-
Parameter
Value
Range
Display
CC# 0 – 127 CC#: 0 – 127
Minimum Value 0 – 127 Min. Value:
Maximum Value 0 – 127 Max. Value:
Button Behavior * Toggle, Momentary Press:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
Global, USB,
Ext, USB+Ext
Out:
RPN and NRPN Sub-Parameters:
Sub-Parameter Value Range Display
LSB 0 – 127 LSB:
MSB 0 – 127 MSB:
Minimum Value 0 – 127 Min. Value:
Maximum Value 0 – 127 Max. Value:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
Global, USB,
Ext, USB+Ext
Out:
Resolution Coarse, Fine Reso:
Button Behavior * Toggle, Momentary Press:
Program Change Sub-Parameters:
Sub-Parameter Value Range Display
LSB 0 – 127 LSB:
MSB 0 – 127 MSB:
Program Number 0 – 127 Program#:
MIDI Channel Global, 1 – 16 MIDI Channel:
MIDI Output
Global, USB,
Ext, USB+Ext
Out:
Transport Controls
Available MIDI Message Types:
Parameter MIDI Message Display
MIDI CC 0 – 127 MIDI CC ->
RPN 128 RPN Define ->
NRPN 129 NRPN Define ->
MIDI Machine
Control
MMC MMC ->
Control Disable ** - Control OFF
MMC MIDI Message Types:
Sub-Parameter MIDI Message Display
MIDI Output
Global, USB,
Ext, USB+Ext
Out:
* Button Behavior Settings:
• Toggle: Alternates between sending 127 and 0
with each press. Releasing the button sends no
message.
• Moment[ary]: Pressing button sends 127,
releasing button sends 0
Selecting MMC will assign the standard MMC message to
each transport button.
Sub-parameters for the transport controls' MIDI CC, RPN,
and NRPN messages are the same as the Fader Buttons,
Sustain Pedal section above.
* When Control OFF appears on the LCD, you can press
the center Directional button to disable MIDI output from the
selected control. Press the center Directional button again on
another parameter to re-enable it.