Filter
Top Products
108 Appendix F: Modification For VeniceU16 Rack Mounting
VeniceU
Operator Manual
Modification procedure
1 Electrically isolate the U16 console by completely disconnecting it from the
mains. Remove all cables from the console, such as mains, audio, lamp, etc.
2 Remove both side cheeks. Remove one side cheek by removing the five 5 mm
screws (use 5 mm Allen key). Do the same for the other side cheek.
3 On one side of the console, slacken/remove the seven M3 x 6 mm pan head
screws (use a T10 Torx screwdriver/wrench/bit) securing the rear panel. Do the
same for the other side.
These two screws secure the
blanking bracket