Filter
Top Products
Local monitor and phones 73
VeniceU
Operator Manual
Local monitor and phones
There are two local monitor outputs on the rear panel for providing a signal for monitor
speakers.
Local monitor outputs on the rear panel
A local monitor section on the control surface lets you connect headphones for local
monitoring and adjust their signal level, and also the signal level of the local monitor
outputs.
Local monitor section on the control surface and the position of the addition
headphones socket on the front panel of the console
Item Description
1 phones control knob Adjusts the headphones level, which is
continuously variable from
4 (infinity/off) to +10dB.
2 MUTE switch and red LED The MUTE switch mutes the headphone
signal. The LED is illuminated when the switch is on.
3 Output socket The local monitor section has a 1/4” TRS Jack socket for
headphones. There is an additional socket under the armrest of the
console.
4 pfl switch and yellow LED When this solo switch is on (LED illuminated),
the local monitor and headphones signal is sourced from the PFL mono
signal, rather than the AFL stereo default.
5 MUTE switch and red LED The MUTE switch mutes the local monitor
outputs. The LED illuminates when the switch is on.
6 local control knob Adjusts the local level, which is continuously variable
from
4 (infinity/off) to +10dB.
1
3
6
25
4