Pioneer DJM-800 Musical Instrument User Manual


 
11
<DRB1394>
En
English
2. Channel select display section
The <CH SELECT> indicator lights constantly, and a red frame
lights around the number position corresponding to the
chosen effect channel selector.
3. Parameter display section
<PARAMETER>:
The <PARAMETER> indicator lights constantly.
AUTO/TAP:
[AUTO] lights when the BPM measuring mode is set to AUTO,
and [TAP] lights when the BPM measuring mode is set to
manual (TAP).
BPM counter display (3 digits):
In AUTO mode, displays the automatically detected BPM value.
If the BPM count cannot be detected automatically, the display
will flash at the previously detected value. In manual (TAP)
mode, displays the BPM value designated by TAP input, etc.
BPM:
Lights constantly.
MIDI:
Displays the MIDI start/stop status.
Indicator lights after MIDI start command has been sent.
Indicator goes out after MIDI stop command has been sent.
NAMES AND FUNCTIONS OF PARTS (DISPLAY SECTION)
Parameter 1 display (5 digits):
Displays
parameters designated for each effect. When the beat
select buttons (BEAT 2, 3) are pressed, the corresponding
beat multiple change is displayed for one second. If the beat
select buttons (BEAT 2, 3) are used to designate a value
outside the parameter range, the current number will flash
but will not change.
Unit Display (%/ms):
Lights in accordance with the unit used for each effect.
4. Beat display section
Displays the location of parameter 1 relative to BPM (1/1 beat).
The lower row is lighted constantly. When the parameter 1
location approaches a threshold value, the corresponding
indicator is lighted. When the parameter 1 is between
threshold values, the indicator flashes. Although the display
includes seven actual indicators, the two ends can also be
considered to act as indicators, with the result that a
theoretical nine positions can be postulated. When the values
are at the two ends, no indicators light.
DELAY
ECHO
REV DLY
PAN
TRANS
FILTER
FLANGER
PHASER
REVERB
ROBOT
CHORUS
ROLL
REV ROLL
SND/RTN
Effect
selector
1 Effect display
Upper/
Effect name
Lower
3 Parameter display 4 Beat display
Minimum Maximum
Default Unit 123456789
value value
Upper DELAY
Lower
Upper ECHO
Lower
Upper REVERSE
Lower DELAY
Upper PAN
Lower
Upper TRANS
Lower
Upper FILTER
Lower
Upper FLANGER
Lower
Upper PHASER
Lower
Upper REVERB
Lower
Upper ROBOT
Lower
Upper CHORUS
Lower
Upper ROLL
Lower
Upper REVERSE
Lower ROLL
Upper SEND/
Lower RETURN
1 4 000 500 ms 1/8 1/4 1/2 3/4 1/1 2/1 4/1 8/1 16/1
1 4 000 500 ms 1/8 1/4 1/2 3/4 1/1 2/1 4/1 8/1 16/1
10 4 000 500 ms 1/8 1/4 1/2 3/4 1/1 2/1 4/1 8/1 16/1
10 16 000 500 ms 1/16 1/8 1/4 1/2 1/1 2/1 4/1 8/1 16/1
10 16 000 500 ms 1/16 1/8 1/4 1/2 1/1 2/1 4/1 8/1 16/1
10 32 000 2 000 ms 1/4 1/2 1/1 2/1 4/1 8/1 16/1 32/1 64/1
10 32 000 2 000 ms 1/4 1/2 1/1 2/1 4/1 8/1 16/1 32/1 64/1
10 32 000 2 000 ms 1/4 1/2 1/1 2/1 4/1 8/1 16/1 32/1 64/1
1 100 50 % 102030405060708090
100 100 0 % —–100 66 50 0 26 50 100
10 32 000 2 000 ms 1/4 1/2 1/1 2/1 4/1 8/1 16/1 32/1 64/1
10 4 000 500 ms 1/16 1/8 1/4 1/2 1/1 2/1 4/1 8/1 16/1
10 4 000 500 ms 1/16 1/8 1/4 1/2 1/1 2/1 4/1 8/1 16/1
Shaded items are not displayed.