Filter
Top Products
23
<DRB1314>
Use the EFFECT MIX selector switch to select the desired operation mode.
OFF: Normal mode
¶ No Effect Mix operation.
¶ All three Effect select/start switches (ECHO, ZIP, ROLL) will remain unlighted.
¶ The cross fader left-right Fader displays A and B will both be unlighted.
FADER: Effect Mix Fader Mode
¶ The Cross fader lever can be used to manipulate effects, and to perform cue start/back cue.
¶ Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash (default setting is ECHO), and the
others will light steadily.
¶ The cross fader left-right Fader displays A and B will light as follows:
Condition Fader Display A Fader Display B
When Cross fader lever is at A side LIGHTS OFF
When Cross fader lever is at B side OFF LIGHTS
When mode is entered with Cross fader lever at midway point LIGHTS LIGHTS
When Cross fader lever is moved from A side to midway point
FLASHES OFF
after mode is entered.
When Cross fader lever is moved from B side to midway point
OFF FLASHES
after mode is entered.
AUTO: Effect Mix Auto Mode
¶ The three Effect select/start switches (ECHO, ZIP, ROLL) can be used to manipulate effects and to perform cue start/back cue
(Cross fader lever does not operate).
¶ Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash, and the others will light steadily.
¶ The cross fader left-right Fader displays A and B will light as follows:
Condition Fader Display A Fader Display B
When mode is entered with Cross fader lever at A side LIGHTS OFF
When mode is entered with Cross fader lever at B side OFF LIGHTS
When mode is entered with Cross fader lever at midway point LIGHTS LIGHTS
When sound from A side is output LIGHTS OFF
When effects are applied to A side FLASHES OFF
When sound from B side is output OFF LIGHTS
When effects are applied to B side OFF FLASHES
The effect mix mode does not operate when Assign A and Assign B are set to the same channel.
(In this case, fader display A, fader display B, and the fader start display for the selected channel will all flash).
Cross fader lever
CROSS FADER ASSIGN
A switch
CROSS FADER ASSIGN
B switch
Effect select/
start switches
FADER START switches
EFFECT MIX
selector switch
Fader display A Fader display B
USING THE EFFECT MIX FUNCTION
Selecting the Effect Mix Function