Filter
Top Products
4
<DRB1314>
FEATURES
Effect Mixing
Changing between three kinds of effect mix (ECHO, ZIP,
ROLL) can be performed easily merely by operating the
Cross fader lever, or by pressing the Effect select/start
switch.
BPM Counter
The auto BPM counter provided makes music tempo visible
to the eye.
Peak Level Meter
The peak level meter provided is equipped with 11-bit LED
indicators for all channels.
Fader Start/Stop
The CD player can be started or stopped simply by increasing
or decreasing the level of the cross fader or channel fader.
(This function can only be used when the Pioneer CD player
series CMX-3000, CMX-5000, CDJ-1000, CDJ-100S, CDJ-
700S or CDJ-500
II is connected.)
3-Band Equalizer and Kill
This 3-band equalizer corresponds to the HI, MID, and LOW
channels. The attenuation level also serves as a kill function,
which can decrease the level to –26 dB.
Variety of Effects
Both internal and external effects can be applied to all
channels, the microphone, and master.
A variety of effects can be enjoyed, including delay, echo,
auto pan, auto trans, filter, flanger, reverb and pitch shifter.
Full range of input and output functions
This DJ Mixer is equipped with 4 (+3*) LINE inputs, 4
PHONO (dedicated MM) inputs, and 2 (+1*) MIC inputs, for a
total of 10 inputs. In addition to 2 master output lines (one
supporting professional-grade XLR mode), a variety of other
independent outputs are also provided, including booth
monitor output, recording output, and two digital outputs.
SEND/RETURN jacks are also provided for the connection of
external effects units.
* These additional connectors can optionally be switched
from PHONO input to make up the total.
CHECKING ACCESSORIES CONTENTS
÷ 2 short-circuit pin plugs
These are inserted in the PHONO 4 terminals.
÷ Operating instructions
÷ Warranty
FEATURES ................................................................. 4
CHECKING ACCESSORIES ....................................... 4
CAUTIONS REGARDING HANDLING ...................... 5
Location........................................................................... 5
Installing the DJM-3000 in an EIA rack .......................... 5
Condensation .................................................................. 5
Cleaning the Unit ............................................................ 5
CONNECTIONS ......................................................... 6
PART NAMES AND FUNCTIONS............................. 8
USING THE EFFECT FUNCTIONS.......................... 12
Features of Various Effectors ....................................... 12
Delay, Echo, Auto Pan, Auto Trans, Filter,
and Flanger Operations................................................. 14
Operating Reverb and Pitch Shifter .............................. 16
Using an External Effector ............................................ 17
BPM COUNTING ..................................................... 18
Using the Auto Mode to Count BPM ........................... 18
Using the Manual Mode to Count BPM ....................... 19
USING THE FADER START FUNCTION ................ 20
Starting with the Channel Fader ................................... 21
Starting with the Cross Fader ....................................... 21
USING THE EFFECT MIX FUNCTION .................... 22
Effect Mix Features ...................................................... 22
Selecting the Effect Mix Function ................................ 23
Effect Mix Fader Mode ................................................. 24
Effect Mix Auto Mode .................................................. 25
TROUBLESHOOTING.............................................. 26
SPECIFICATIONS .................................................... 27