Filter
Top Products
Using the Registration Memory
14
When you store a tone with DSP line
turned on, all the DSP parameters are
recalled as you select the tone.
4. Repeatedly press
+
or
–
to change the
parameter’s setting, or use the number
buttons to directly enter a value for the
parameter.
If you want to change another
parameter, repeat Steps 3, 4, and 5.
5. To store the settings, press
G
(
ENTER
)
to display the tone number (
().
().().
().
–
(*-
(*-(*-
(*-
)
where you want to save the user tone.
±
6. Repeatedly press + or – until the tone
number you want appears.
7. Press
G
(
ENTER
) to save the user tone.
IWl[EA
IWl[EAIWl[EA
IWl[EA
appears briefly and the
keyboard exits the Custom Tone
Synthesizer mode.
Or, press
H
(
EXIT
) to exit the Custom
Tone Synthesizer mode without storing
a new tone.
75+0)6*'4')+564#6+10/'/14;
Your keyboard can save different setups of
controls in its registration memory. This lets
you instantly recall your favorite settings.
The registration memory consists of four
banks (0 – 3), each with four memory
locations (1 – 4), totaling up to 16 settings.
You can save each of the following settings
in each registration memory:
±
•tone
•rhythm
• tempo
• split on/off
• split point
• layer on/off
• mixer settings (Channels 1–10)
• effect settings
• equalizer settings
• touch response settings
• assignable jack setting (see “Using a
Sustain Pedal” on Page 15)
• transpose (see “Changing Keys” on
Page 14)
• tuning (see “Tuning the Keyboard” on
Page 14)
• accompaniment volume
• auto harmonize on/off
5614+0)#5'672
1. Set the desired controls to the setting
you want to store.
2. Within 5 seconds, repeatedly press
BANK
until the desired bank number
appears.
3. While holding down
STORE
, press the
desired
REGISTRATION
button (
1
,
2
,
3
,
or
4
).
Ijeh[
Ijeh[Ijeh[
Ijeh[
appears after the selected
bank/location number/letter.
4. Release
STORE
and
REGISTRATION
.
5. Repeat Steps 1–4 to store more setups.
4'%#..+0)#5'672
1. Repeatedly press
BANK
until the
desired bank number appears.
2. Within 5 seconds, press the desired
REGISTRATION
button (
1
,
2
,
3
, or
4
).
H[YWbb
H[YWbbH[YWbb
H[YWbb
appears after the selected bank/
location number/letter.
52'%+#.('#674'5
%*#0)+0)-';5
The keyboard automatically selects the key
of middle C each time you turn it on. For
added flexibility as you play, the keyboard
lets you change (transpose) the musical key
in which it plays. You can transpose the key
up or down 24 semitones (two octaves).
±
1. Press
TOUCH/TRANSPOSE/SETTING
,
then repeatedly press
I
or
J
(
CURSOR
)
until
&&JhWdi
&&JhWdi&&JhWdi
&&JhWdi
appears. The displayed
number is the number of semitones to
which the keyboard is set, compared to
its default key.
2. Within 5 seconds, repeatedly press
–
or
+
to lower or raise the key. Each
time you press
–
or
+
, the key changes
by 1 semitone. As you raise the key, 1 is
C#, 2 is D, and so on. As you lower the
key, –1 is B, –2 is B
J
, –3 is A, and so on.
3. Press
TOUCH/TRANSPOSE/SETTING
to
exit the menu setting mode.
670+0)6*'-';$1#4&
Although your keyboard never goes out of
tune, it lets you adjust its pitch to match
other instruments or musical recordings.
A cent is the measurement that represents
the acoustical interval between two tones.
1,200 cents equal 1 octave. You can tune
the keyboard to within –99 to +99 of its
default pitch.
±
1. Press
TOUCH/TRANSPOSE/SETTING
,
then repeatedly press
I
or
J
(
CURSOR
)
until
&&Jkd[
&&Jkd[&&Jkd[
&&Jkd[
appears. The number on
±
016'
±
Using the Registration Memory
• You cannot use the registration memory
while you are using the synthesizer,
memory, or demo tune functions.
• You cannot delete a registration setup from
memory, but you can store a different setup
in its place.
• You can use the keyboard’s MIDI function
to save your setup data to your PC or other
storage device.
Changing Keys
• You cannot change the key while a
prerecorded tune is selected or playing.
• A semitone is a measurement that
represents the acoustical interval between
the tones of any two keys on the keyboard.
For example, the difference between C and
C# or B and C is one semitone.
• The transpose setting also affects memory
playback (see “Playing Back from Song
Memory” on Page 17) and auto
accompaniment.
• The keyboard automatically resets the key
to the default value of 0 (middle C) each
time you play a pre-recorded tune.
Tuning the Keyboard
• You cannot tune the keyboard while a
prerecorded tune is displayed or playing.
• The tuning setting also affects memory
playback (see “Playing Back from Song
Memory” on Page 17) and auto
accompaniment.
• The keyboard automatically resets the
tuning pitch to the default value of 00
(cents) each time you turn off the keyboard.