Filter
Top Products
35
Effect List
09
Stereo
Phaser
This is a stereo phaser that modulates the
phase in accordance with a sine wave LFO.
0: Resonance (0 to 127) – Adjusts the resonance of the sound.
1: Manual (-64 to 0 to +63) – Adjusts the phaser shift volume, which is used for
reference.
2: Rate (0 to 127) – Adjusts the rate of the LFO.
3: Depth (0 to 127) – Adjusts the depth of the LFO.
4: Wet Level (0 to 127) – Adjusts the volume level of the effect.
10 Phaser
This is a monaural phaser that modulates the
phase in accordance with a sine wave LFO.
0: Resonance (0 to 127) – Adjusts the resonance of the sound.
1: Manual (-64 to 0 to +63) – Adjusts the phaser shift volume, which is used for
reference.
2: Rate (0 to 127) – Adjusts the rate of the LFO.
3: Depth (0 to 127) – Adjusts the depth of the LFO.
4: Wet Level (0 to 127) – Adjusts the level of the effect sound.
11 Rotary This is a rotary speaker simulator.
0: Speed (Slow, Fast) Switches the speed mode between fast and slow.
1: Break (Rotate, Stop) Stops speaker rotation.
2: Fall Accel (0 to 127) – Adjusts acceleration when the speed mode is switched
from fast to slow.
3: Rise Accel (0 to 127) – Adjusts acceleration when the speed mode is switched
from slow to fast.
4: Slow Rate (0 to 127) – Adjusts speaker rotation speed in the slow speed
mode.
5: Fast Rate (0 to 127) – Adjusts speaker rotation speed in the fast speed mode.
12 Drive Rotary This is an overdrive-rotary speaker simulator.
0: Overdrive Gain (0 to 127) – Adjusts overdrive gain.
1: Overdrive Level (0 to 127) – Adjusts the output level of the overdrive.
2: Speed (Slow, Fast) Switches the speed mode between fast and slow.
3: Break (Rotate, Stop) Stops speaker rotation.
4: Fall Accel (0 to 127) – Adjusts acceleration when the speed mode is switched
from fast to slow.
5: Rise Accel (0 to 127) – Adjusts acceleration when the speed mode is switched
from slow to fast.
6: Slow Rate (0 to 127) – Adjusts speaker rotation speed of the slow speed mode.
7: Fast Rate (0 to 127) – Adjusts speaker rotation speed of the fast speed mode.
13 Enhancer
Enhances the outlines of the low range and
high range of the input signal.
0: Low Frequency (0 to 127) – Adjusts the low range enhancer frequency.
1: Low Gain (0 to 127) – Adjusts the low range enhancer gain.
2: High Frequency (0 to 127) – Adjusts the high range enhancer frequency.
3: High Gain (0 to 127) – Adjusts the high range enhancer gain.
14
Ring
Modulator
This is a ring modulator (AM modulator) that
makes it possible to modulate the frequency of
internal oscillator (OSC) in accordance with an
internal LFO.
0: OSC Frequency (0 to 127) Sets the reference frequency of the internal OSC.
1: LFO Rate (0 to 127) – Adjusts the rate of the LFO.
2: LFO Depth (0 to 127) – Adjusts the depth of the LFO.
3: Wet Level (0 to 127) – Adjusts the level of the effect sound.
4: Dry Level (0 to 127) – Adjusts the level of the original sound.
15 Lo-Fi
This is an effector that reproduces a retro-type
Lo-Fi sound using Noise Generator 1 (phono-
graph record player type scratch noise
generator) and Noise Generator 2 (FM radio
type white noise and pink noise continuous
noise generator), and by using noise
modulation (amplitude modulation = AM) and
distortion of frequency characteristics.
0: Noise Level 1 (0 to 127) – Adjusts the level of Noise Generator 1.
1: Noise Density 1 (0 to 127) – Adjusts the noise density of Noise Generator 1.
2: Noise Level 2 (0 to 127) – Adjusts the level of Noise Generator 2.
3: Noise Density 2 (0 to 127) – Adjusts the noise density of Noise Generator 2.
4: Tone (0 to 127) – Adjusts the tone.
5: Resonance (0 to 127) – Adjusts the resonance of the sound.
6: Bass (-64 to 0 to +63) – Adjusts the volume of low sounds.
7: Level (0 to 127) – Adjusts the output level.
16
1-Phase
Chorus
This is a monaural chorus in accordance with a
sine wave LFO.
0: LFO Rate (0 to 127) – Adjusts the rate of the LFO.
1: LFO Depth (0 to 127) – Adjusts the depth of the LFO.
2: Feedback (-64 to 0 to +63) – Adjusts the feedback of the sound.
3: Wet Level (0 to 127) – – Adjusts the level of the effect sound.
17
Sin 2-Phase
Chorus
This is a stereo chorus in accordance with a
sine wave LFO.
0: LFO Rate (0 to 127) – – Adjusts the rate of the LFO.
1: LFO Depth (0 to 127) – Adjusts the depth of the LFO.
2: Feedback (-64 to 0 to +63) – Adjusts the feedback of the sound.
3: Wet Level (0 to 127) – Adjusts the level of the effect sound.
18
3-Phase
Chorus
This is a 3-phase chorus in accordance with two
LFOs of with different sine wave rates.
0: Rate1 (Fast LFO Rate, 0 to 127) – Adjusts the rate of LFO1.
1: Depth1 (Fast LFO Depth, 0 to 127) – Adjusts the depth of LFO1.
2: Rate2 (Slow LFO Rate, 0 to 127) – Adjusts the rate of LFO2.
3: Depth2 (Slow LFO Depth, 0 to 127) – Adjusts the depth of LFO2.
4: Wet Level (0 to 127 – Adjusts the level of the effect sound.
19
Tri 2-Phase
Chorus
This is a stereo chorus in accordance with
triangular wave LFO.
0: LFO Rate (0 to 127) – Adjusts the rate of the LFO.
1: LFO Depth (0 to 127) – Adjusts the depth of the LFO.
2: Feedback (-64 to +63) – Adjusts the feedback of the sound.
3: Wet Level (0 to 127) – Adjusts the level of the effect sound.
20
Stereo
Delay 1
This is a delay of stereo input and output.
0: Delay Time (0 to 127) – Adjusts the delay time.
1: Wet Level (0 to 127) – Adjusts the level of the effect sound.
2: Feedback (0 to 127) – Adjusts the repeat of the delay.
3: High Damp (0 to 127) – Adjusts damping of the high-range delay sound. The
smaller the value, the greater the damping of high-range delay sound.
4: Ratio L (0 to 127) – Adjusts the delay time of the left channel, proportional to
the value set for Delay Time.
5: Ratio R (0 to 127) – Adjusts the delay time of the right channel, proportional to
the value set for Delay Time.
0WODGT 0COG (WPEVKQP 2CTCOGVGTU