Filter
Top Products
37
To enter a rest, press
0
then use num-
bers
1
through
9
to specify the length of
the rest.
Correcting Mistakes
Before finishing your step recording en-
try, you can move the entry point back to
correct the data you entered. However,
this operation deletes all data after the
point where you make corrections.
1. Before you press
MEMORY
,
STEP
, or
START/STOP
to end recording, press
. This moves the entry point back
one “space.”
The data recorded at the current
entry point appears on the display.
2. While monitoring the data on the
display, press or to move the
entry point to the data you want to
change.
3. At the entry point you want to
change, press
+
and
–
at the same
time.
Rewrite?
appears on the
display.
4. Press to clear all data after the
current entry point.
5. Press , ,
+
, or
–
to cancel the
rewrite operation. After that, you can
press or to move the entry point
to another location if you want.
Note:
TrackEnd appears on the
display if you press at the end of
the recording.
RECORDING MULTIPLE
TRACKS
In addition to the Track 1, where you
record auto accompaniment as well as
keyboard play, there are five other melo-
dy tracks that you can use to record mel-
ody parts only. You can record different
tones on these tracks and build a full en-
semble of instruments.
You can play back what you already re-
corded on Track 1 (or any other track)
while you record on Tracks 2–6.
Real-Time Recording
1. Repeatedly press
MEMORY
until
Rec.
No.
appears.
2. Within 5 seconds, use
+
or
–
to
select a song number.
3. Press the desired
MEMORY TRACK
button (
2
–
6
) to select the track you
want to record on.
Note:
Check the display for Chan-
nels 11–16 to see which memory
tracks contain data and which are
empty.
4. If desired, you can change these
settings:
• tone number
•
TEMPO
(to a tempo that is easy
for you to follow)
42-4043.fm Page 37 Tuesday, August 3, 1999 6:51 AM