Radio Shack MD-1600 Electronic Keyboard User Manual


 
9
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a vol-
ume level that does not cause dis-
comfort might still damage your
hearing.
CONNECTING AN
EXTERNAL AMPLIFIER
To amplify your MD-1600’s sound, you
can connect it to an external amplifier
(not supplied) using an audio cable (not
supplied) with a
1
/
4
-inch (6.35-mm) plug.
To connect an external amplifier to your
keyboard, insert the cable’s
1
/
4
-inch
(6.35-mm) plug into the
PHONES/OUT-
PUT
jack on the back of the keyboard,
and connect the cable’s other end to the
amplifier’s input jack(s) (such as AUX IN
or TAPE IN).
Your local RadioShack store sells a full
line of amplifiers, speakers, and connec-
tion cables.
USING THE MUSIC STAND
To easily view sheet music while playing
your keyboard, insert the supplied music
stand into the slot on the top back panel.
42-4043.fm Page 9 Tuesday, August 3, 1999 6:51 AM