Filter
Top Products
45
Local
(Local Control) (Default:
On): set to on to send data simulta-
neously to the keyboard’s speakers
and as MIDI data. Set to
oFF
to
send data only as MIDI data (the
speakers on the keyboard remain
silent).
AcompOut
(Accompaniment Out)
(Default: Off): set to on to send auto
accompaniment as MIDI data. Set to
oFF
to turn it off.
3. Within 5 seconds, use
+
or
–
to
change the setting of the parameter.
DUMPING/IMPORTING
DATA
The MD-1600’s internal data, including
data recorded to memory and synthesiz-
er data, can be sent and received in bulk
as MIDI exclusive data through the MIDI
terminals. Thus, you can use a comput-
er or other MIDI device as an external
storage device.
First make connections from the
MIDI IN
and
MIDI OUT
terminals to an external
device using MIDI cables.
Note:
Some software does not support
MIDI exclusive data.
Dumping Data
Follow these steps to dump data from
the keyboard to an external device.
1. Put the other device in its receive
standby mode.
See the Owner’s Manual that comes
with the receiving device for details.
2. Repeatedly press
TRANSPOSE/
TUNE/MIDI
on the MD-1600 until the
display shows
BulkSnd?
.
3. Within 5 seconds, press to start
data send.
Sending
appears. The
MD-1600 automatically exits the
data transfer mode after all the data
is sent.
Importing Data
Follow these steps to import dumped
data from another device.
1. Repeatedly press
TRANSPOSE/
TUNE/MIDI
so the display shows
BulkSnd?
.
2. Within 5 seconds repeatedly press
or so the display shows
BulkRcv?
.
3. Within 5 seconds, press to pre-
pare the keyboard to receive data.
4. Start the send operation on the
sending device. See the manual that
comes with the connected device for
details. The MD-1600 automatically
exits the data transfer mode after all
the data is received.
42-4043.fm Page 45 Tuesday, August 3, 1999 6:51 AM