Radio Shack MD-1600 Electronic Keyboard User Manual


 
8
Using AC Power
You can power your MD-1600 from
standard AC power using a 12-volt AC
adapter (not supplied) and a Size M
Adaptaplug.
Cautions:
You must use an AC
adapter that supplies 12
volts and delivers at least
1.5 amps. Its center tip must be set
to negative, and its plug must cor-
rectly fit the MD-1600’s
DC 12V
jack.
Using an adapter that does not meet
these specifications could damage
the MD-1600 or the adapter.
Always press
POWER
to turn off the
keyboard before you connect or dis-
connect the adapter.
Always plug the AC adapter into the
MD-1600 before you plug it into the
AC outlet. Always unplug the AC
adapter from the AC outlet before
you unplug it from the MD-1600.
Follow these steps to power your MD-
1600 from AC power.
1. Insert the adapter’s barrel plug into
the
DC 12V
jack on the back of the
MD-1600.
2. Plug the adapter into a standard AC
outlet.
CONNECTING
HEADPHONES
To listen to your MD-1600 without dis-
turbing others, you can connect a pair of
1
/
4
-inch (6.35-mm) plug stereo head-
phones (not supplied). Your local Ra-
dioShack store sells a wide selection of
headphones.
To connect a pair of headphones, insert
the headphones’
1
/
4
-inch (6.35-mm) plug
into the
PHONES/OUTPUT
jack on the
back of the keyboard.
Note:
Connecting headphones discon-
nects the MD-1600’s built-in speakers.
Listening Safely
To protect your hearing, follow these
guidelines when you use headphones.
Set the volume to the lowest setting
before you begin listening. After you
begin listening, adjust the volume to
a comfortable level.
Do not listen at extremely high vol-
ume levels. Extended high-volume
listening can lead to permanent
hearing loss.
!
42-4043.fm Page 8 Tuesday, August 3, 1999 6:51 AM