Revolabs 01-ELITEEXEC8 Microphone User Manual


 
17
Installation
Base DSP Unit
The Revolabs Executive Elite Base DSP Unit, shown below in front and rear
panel views, provides the audio output of the wireless microphones and the
management interfaces to administer the microphone system.
Front View
1. USB web access to local web user interface
2. Microphone status LEDs, showing pairing and mute status (8 LEDs on
the Executive Elite 8 microphone system, 4 LEDs on the executive
Elite 4 microphone system)
3. Front panel LCD displaying system information
4. Navigation buttons controlling content of front panel LCD display
5. On/Off switch
Rear View
6. Power In Receptacle (100-240 VAC, 50/60 Hz)
7. Remote Antenna Connector, PoE enabled
8. AVB network connector
9. LAN network connector
10. Serial port for room control interface
11. USB connector, future use
12. Euroblock connector (grey), Executive HD compatible synchronization
bus
13. Euroblock Connectors, analog audio in (black) and audio out (green),
microphone channels 1-4
14. Euroblock Connectors, analog audio in (black) and audio out (green),
microphone channels 5-8 (only on Executive Elite 8 microphone
systems)
2
1
3
4
5
6
7
8
9
10
11
12
13
14