Filter
Top Products
39
First time usage
When installing the Executive Elite Base DSP unit and opening the web
interface for the first time, the system will require some system wide settings
that need to be made before the system becomes operational. Webpages to
make these selections will be opened first.
The New Systems Configuration page asks for system information. The system
name will help identifying the system in multi-system installations. It is
mandatory to provide a name. Country/Region is required to define wireless
settings in the system. You need to select the country or region in which the
system is being used.
NOTE: Selecting a different region than the region you are using the
system in may void your right to use the system! If you are unsure
about which region to select, please contact Revolabs support at
support@revolabs.com.
Cluster Name allows for common microphone group definitions across several
Elite Systems. Elite Systems that are in the same Cluster will find each other
in the network, and coordinate mute commands. This allows definition of
microphone groups across several Base DSP units, enabling mute behavior
across larger groups of microphones. In standalone systems that are not
supposed to coordinate behavior with other systems, do not provide a Cluster
Name. If you are not sure whether this system will be part of a Cluster, or you
currently do not know the cluster name, do not provide a name at this time.