Filter
Top Products
87
Chapter 3 Using the Registration Buttons
Loading Previously Saved Registration
Sets Into the AT-90S/80S/60S
Here’s how to recall a previously saved Registration set from the floppy disk
into the memory of the AT90S/80S/60S. Registrations can be selected in the
following three ways.
Loading a Set of Registrations (Load) → (p. 87)
You can load a “set” (a collection of settings for Registration buttons [1]–[12]
on the AT-90S/80S, Registration buttons [1]–[8] on the AT-60S) from floppy
disk.
Loading an Individual Registration (Load One) → (p. 89)
Recall the settings of one of the Registration [1]–[12] buttons (on the AT-60S,
Registration buttons [1]–[8]).
Recalling the Order that the Registrations are Saved on the
Floppy Disk (Load Next) → (p. 92)
Press the [Load Next] button to recall registration sets in the order in which
they are saved on the floppy disk.
■ Loading a Set of Registrations
1. Insert the floppy disk containing the Registration into the
disk drive.
2. Touch <Registration> on the Main screen.
The sub-window appears.
fig.03-04_55
NOTE
Be aware that when you
load Registrations from a
disk, the Registrations that
were previously in internal
memory will be lost. It is a
good idea to save
important Registrations to
floppy disk (p. 84).
You can also open the
Registration Load screen by
pressing the [Registration]
b
utton, instead of
performing steps 2 and 3.
Min
Max
Min
Max
Min
Max
Min
Max
Harmony Intelligence